View previous topic :: View next topic |
Author |
Message |
OGOPTIMUS Captain
![](images/avatars/725069854f0279524c97e.png)
Joined: 10 Nov 2006 Posts: 980
|
Posted: Tue Sep 02, 2008 10:50 pm Post subject: Two More in the Mix |
|
|
Here's some of my latest work:
A Federation Kirov Class Heavy Battlecruiser, with extra drones, the USS New Zealand Set 1 and Set 2.
I used the CC Saucer here for several reasons. First, because it's nice, second, because I'm borrowing the saucer for another mini, and third/fourth, it differentiates it nicely from my BCJ, since the neck isn't there and I like drones as hatches on the hull, like a sub launching missiles versus torpedoes.
Here’s a pic of all three of my Heavy Battlecruisers. From left to right, the BCG New Zealand, kitbahsed BCF Nikolai V. Orarkov, and BCJ New Jersey.
And, my latest prize………a Federation Heavy Command Cruiser, the USS Coral Sea.
Montage A
Montage B
Montage C
I based this one off of a model made as a MOD for SFC1, 2, and OP, as well as Bridge Commander that I found later in 2007. I loved it instantly, and decided to make a mini out of it, again almost instantly (took a while to get it right, see below). The model was made by a gentleman named Rod Oneal. If you play these games still, I’d highly suggest getting this MOD—it’s fantastic! Check out the pics of the MOD here and here.
Here’s a copy of Rod’s blurb as to why he made this particular model:
This design is based off the conjecture that the refit seen in “Star Trek the Motion Picture” was too dramatic to have been a single design upgrade. In Starfleet Battles there is an interim refit between the Command Cruiser (the last refit of the Enterprise before TMP) and the 1st generation X ships (generally accepted as the TMP refit), the CB or heavy command cruiser. The command cruiser U.S.S. Vincennes received this refit before receiving the X refit, where as the Enterprise did not. It went directly to the X-cruiser design. Often there wasn’t enough time to get to every vessel before another upgrade came along. This is my interpretation of what that class might have looked like.
The nacelles were somewhat tricky—I went through them many times. In fact, the ones on the ship currently are the third iteration of them. I got the ends easily enough, just some tubing cut at an angle with some plastic card added for fins. The real trouble to get right were the TMP-style cutouts on the sides. The first nacelles just used plastic tubing sanded flat on the sides, but I overdid it and made the sides too flat to really match the original mini. So I scrapped them after I put the mini together and didn’t like them. They’re on a FASA Loknar that I got without engines now and that will be used as a Command Light Cruiser (pics to follow sometime in the future).
The second set also just had filed down tubing as nacelles, but this time I didn’t make the indents as deep. These made it onto the mini and got painted before I scrapped them for the current ones. These are on the bench awaiting some new project (perhaps something like Rick Smith’s Shanks Class NCL), once I order more plastic Tug saucers from ADB…(I think I’ve gone through about 15 now… ). The third and current incarnation of the nacelles is actually that same plastic tubing with the sides cut out of it. The black/blue surface is actually the same tube as the narrower end of the nacelle, just lengthened inside. I think this one came out the best, and closest to Rod’s model.
I wasn’t initially a fan of the “two-tone” paint scheme that I see kicked around online for TMP ships, but as I began painting this one, it just seemed that I had too use it--Rod’s model was way too nice for me not to! I’m really happy with how this one came out finally, and I hope you all enjoy it too. _________________ O.G. OPTIMUS
Newest Page | Newer Page | OLD Page |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Rick Smith Lieutenant Commander
![](images/avatars/534987054c56eedf84abd.png)
Joined: 02 Sep 2008 Posts: 266 Location: Silver Spring, MD
|
Posted: Tue Sep 02, 2008 11:08 pm Post subject: |
|
|
Great work on the conversion of the USS Coral Sea. Good research and inspiration
+ attention to detail = great modeling success! The "in between" ship configuration
makes complete sense. And adding the two-tone color scheme (you beat me to it -
the Shanks was gonna get that treatment! haha!) ties your whole theme together.
Superb work. Can't wait to see more! _________________
UPFY |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
djdood Commodore
![](images/avatars/gallery/fed_command/2204Washington.jpg)
Joined: 01 Feb 2007 Posts: 3412 Location: Seattle, WA
|
Posted: Tue Sep 02, 2008 11:39 pm Post subject: |
|
|
Nice work. Very clean detail painting.
I did the same thing for my BC's, but I added a small blockhouse to the neck with plastic sheet (there is a photo of these somewhere in a post that I can't seem to find anymore). _________________
![](https://i.imgur.com/EVNDuWI.png) ![](http://i.imgur.com/rjXnk1K.png) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Scoutdad Commodore
![](images/avatars/gallery/fed_command/BGM.jpg)
Joined: 09 Oct 2006 Posts: 4754 Location: Middle Tennessee
|
Posted: Tue Sep 02, 2008 11:57 pm Post subject: |
|
|
Will, go to your profile...
click "find all posts by..."
then scroll through until you find a post in the correct thread...
That will let you post a reply or a link. Either one will open it back up for new-comers to see. _________________ Commander, Battlegroup Murfreesboro
Department Head, ACTASF |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
djdood Commodore
![](images/avatars/gallery/fed_command/2204Washington.jpg)
Joined: 01 Feb 2007 Posts: 3412 Location: Seattle, WA
|
Posted: Wed Sep 03, 2008 12:04 am Post subject: |
|
|
True, *if* I could remember what thread... lots of posts to wade through and I think I posted that pic as a reply in someone else's thread. _________________
![](https://i.imgur.com/EVNDuWI.png) ![](http://i.imgur.com/rjXnk1K.png) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Scoutdad Commodore
![](images/avatars/gallery/fed_command/BGM.jpg)
Joined: 09 Oct 2006 Posts: 4754 Location: Middle Tennessee
|
Posted: Wed Sep 03, 2008 12:10 am Post subject: |
|
|
Bummer -
Add a link to the photo here for comparisions... _________________ Commander, Battlegroup Murfreesboro
Department Head, ACTASF |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Savedfromwhat Commander
![](images/avatars/gallery/fed_command/KR.jpg)
Joined: 23 Aug 2007 Posts: 657
|
Posted: Wed Sep 03, 2008 12:15 am Post subject: |
|
|
Where did that awesome saucer come from? |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Rick Smith Lieutenant Commander
![](images/avatars/534987054c56eedf84abd.png)
Joined: 02 Sep 2008 Posts: 266 Location: Silver Spring, MD
|
Posted: Wed Sep 03, 2008 12:21 am Post subject: |
|
|
Yeah...I forgot to ask about that. Rad saucer? _________________
UPFY |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
OGOPTIMUS Captain
![](images/avatars/725069854f0279524c97e.png)
Joined: 10 Nov 2006 Posts: 980
|
Posted: Wed Sep 03, 2008 12:32 am Post subject: |
|
|
It's from a Furuta (Japanese company) model refit Enterprise. They made a full range of miniatures from all series ranging from TOS to Voyager and some from Enterprise, I think. The range even includes a bust of Mr. Spock included for some reason.
I got a few off of eBay about 2 years ago, and at the time I didn't have any FASA 1701A's to use, so I stripped the paint off of it using simple green for a week, and then used the saucer and hull for this mini.
Just do a google image search for 'furuta enterprise' and you'll see it (should be the first three pics). _________________ O.G. OPTIMUS
Newest Page | Newer Page | OLD Page |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
OGOPTIMUS Captain
![](images/avatars/725069854f0279524c97e.png)
Joined: 10 Nov 2006 Posts: 980
|
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
djdood Commodore
![](images/avatars/gallery/fed_command/2204Washington.jpg)
Joined: 01 Feb 2007 Posts: 3412 Location: Seattle, WA
|
Posted: Wed Sep 03, 2008 3:50 am Post subject: |
|
|
Steal away. That's the pic I was looking for anyways.
Those are Fed-BC minis, with Fed CC saucers (the new computer-modeled and grown one's), with the BC's neck-box added from plastic scrap.
I later went back and added the extra two phaser bumps under the saucers with epoxy. _________________
![](https://i.imgur.com/EVNDuWI.png) ![](http://i.imgur.com/rjXnk1K.png) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
malleman Lieutenant Commander
![](images/avatars/8285000314950f1ea87236.gif)
Joined: 12 Jan 2008 Posts: 307 Location: Lafayette, LA
|
Posted: Thu Sep 04, 2008 5:05 am Post subject: |
|
|
As always, impressive work. Especially on the kitbashes.
OGOPTIMUS you do have an eye for detail. Makes me want to go slap my paint brush. ![Very Happy](images/smiles/icon_biggrin.gif) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Wolverin61 Commander
![](images/avatars/3029580904a28619becfa8.jpg)
Joined: 16 Nov 2008 Posts: 495 Location: Mississippi
|
Posted: Sat Dec 27, 2008 10:33 pm Post subject: |
|
|
Great work guys! Makes me want to go make up a BCV out of the BC and CVF I've still got in the packs.
Actually I'll just end up swapping saucers between them I imagine. _________________ "His pattern indicates two-dimensional thinking."
![](http://i349.photobucket.com/albums/q369/wolverin61/SFB-Ribbons.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|