View previous topic :: View next topic |
Author |
Message |
OGOPTIMUS Captain
![](images/avatars/725069854f0279524c97e.png)
Joined: 10 Nov 2006 Posts: 980
|
Posted: Sun Nov 18, 2007 12:10 am Post subject: Distinguishing characteristics of X-Ships |
|
|
I know this might not belong here, but I'm looking forward to painting my X-ships (2 CAs and a DD under consideration/construction), and I'm wondering if they should have a different paint scheme. I know that an XCA is supposed to be identical to a regular one externally (there's even that scenario where the USS Vincennes and USS El Dorado surprise three D5s in SH157.0 who are unaware of the existence of the CX), perhaps minus the different phaser ports.
I guess I'm drawing some inspiration from Star Trek TMP where the new refitted Enterprise (which from the rumors I've heard the original CX was supposed to be before Paramount said something) is all white versus the original TOS Enterprise was a slight gray color.
Does anyone have opinions or data regarding this? _________________ O.G. OPTIMUS
Newest Page | Newer Page | OLD Page |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
djdood Commodore
![](images/avatars/gallery/fed_command/2204Washington.jpg)
Joined: 01 Feb 2007 Posts: 3413 Location: Seattle, WA
|
Posted: Sun Nov 18, 2007 12:49 am Post subject: |
|
|
Not a whole lot "official" has been established, which is bad for knowing what to do, but good in that it creates a blank sheet of paper.
I've always pictured the CX as something like the "Phase II" Enterprise, or one of the upgrades from the old Heavy Cruiser Evolution blueprint/poster (I forget the class name they gave it, but it had the slab-sided engines).
Some pictures were posted to the legacy BBS a few months ago that showed a new ADB CC saucer placed onto a FASA movie Enterprise aft hull (I think they tweaked the engines as well). |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Scoutdad Commodore
![](images/avatars/gallery/fed_command/BGM.jpg)
Joined: 09 Oct 2006 Posts: 4754 Location: Middle Tennessee
|
Posted: Sun Nov 18, 2007 1:39 am Post subject: |
|
|
Optimus: Will is correct. Not a lot has been done "officially" to differentiate X-ships from non X-ships. In fact, it seems that efforts have been made to prevent any distinctions from being made... note the scenario Will mentioned.
With that in mind, here's what I have done to indicate X-ships. Mike Raper made a CX and a GSX that I purchased from him. In both of those, the struts holding the nacelles were modified to include a backward "rake" of about 20 to 25 degrees. Not a lot, but enough the significantly differentiate them from a CA or a GSC when each is one the table.
Additionally, the CA was modified to include a cut-out at the front of the primary hull (the saucer section), 'ala Voyager.
Mike paints his Federation ships in a gray base color that is very close to the TOS colors, whereas all of my Federation ships are "Titanium White". This also provides a visual difference in the X-ships / non X-ships. One other bit of difference. Mike's Federation ships are painted with a blue dome on the nacelles as opposed to the usual orange. I have elected to carry this scheme throughout my fleet as a distinctive marking found on "Hot Warp" engines. All of my "Fast" Federation ships and any future X-ships will have blue domes on the nacelles.
Also, after making a few trades, I found myself the proud owner of several pieces of the FASA minitures. I had enough saucers and engines to build an entire squadron of DDX's (including a SCX). Since these will have the slab-sided engines of he FASA ships, they will be easy to differentiate from non-X-ships, as well.
Hope this helps. _________________ Commander, Battlegroup Murfreesboro
Department Head, ACTASF |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
djdood Commodore
![](images/avatars/gallery/fed_command/2204Washington.jpg)
Joined: 01 Feb 2007 Posts: 3413 Location: Seattle, WA
|
Posted: Tue Nov 20, 2007 1:03 am Post subject: |
|
|
I do the blue engine dome on my "fast" ships as well. It's a sky blue with some insignia white dry-brushed onto it. |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Scoutdad Commodore
![](images/avatars/gallery/fed_command/BGM.jpg)
Joined: 09 Oct 2006 Posts: 4754 Location: Middle Tennessee
|
Posted: Tue Nov 20, 2007 2:35 am Post subject: |
|
|
djdood wrote: | I do the blue engine dome on my "fast" ships as well. It's a sky blue with some insignia white dry-brushed onto it. |
Mine is:
CeramCoat: Cobalt BLue - basecoat
Folk Art: Cyan - drbrushed
Apple Barrel: Whicker White - highlights
Windsor & Newton: Blue ink (very thin) wash _________________ Commander, Battlegroup Murfreesboro
Department Head, ACTASF |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Wolverin61 Commander
![](images/avatars/3029580904a28619becfa8.jpg)
Joined: 16 Nov 2008 Posts: 495 Location: Mississippi
|
Posted: Sat Jan 03, 2009 1:35 am Post subject: |
|
|
I paint my Federation X ships a very light blue instead of the (almost white) light gray I use on the regular Federation ships. I use a Micro Machines TMP Enterprise as a CX and it's a light blue. I've used the Reliant as a DDX before. Think I even used the Excelsior figure one time as an X ship. They're all the same color, so I painted my old FF with the rectangular engines up like it to be an FFX. It's a lighter shade of blue though.
I suppose it's not plumb accurate, but you can tell the X ships at a glance and it looks good imho. _________________ "His pattern indicates two-dimensional thinking."
![](http://i349.photobucket.com/albums/q369/wolverin61/SFB-Ribbons.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Scoutdad Commodore
![](images/avatars/gallery/fed_command/BGM.jpg)
Joined: 09 Oct 2006 Posts: 4754 Location: Middle Tennessee
|
Posted: Sat Jan 03, 2009 1:41 am Post subject: |
|
|
Wolverin61 wrote: | ... and it looks good imho. |
That's the big thing - if you're happy with it; then it's GOOD! _________________ Commander, Battlegroup Murfreesboro
Department Head, ACTASF |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Wolverin61 Commander
![](images/avatars/3029580904a28619becfa8.jpg)
Joined: 16 Nov 2008 Posts: 495 Location: Mississippi
|
Posted: Sat Jan 03, 2009 2:02 am Post subject: |
|
|
Vanguard wrote: | John F Kennedy Class (CF) |
I'm going to put one of these together out of a CF primary hull and a BC secondary hull (even though the NCC no. is in the CS series, to me the secondary hull looks like a BC and not a CS). I may paint it the light blue I use for the X ships, haven't decided yet. I'll paint the front of the warp engines the 'fast' blue either way. _________________ "His pattern indicates two-dimensional thinking."
![](http://i349.photobucket.com/albums/q369/wolverin61/SFB-Ribbons.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Rick Smith Lieutenant Commander
![](images/avatars/534987054c56eedf84abd.png)
Joined: 02 Sep 2008 Posts: 266 Location: Silver Spring, MD
|
Posted: Sat Jan 03, 2009 4:10 am Post subject: |
|
|
If you want to go the TMP route, there's a few sites (and modelers) that inspire me. Maybe you guys have already run into them as well.
Tim Ketzer did an amazing 1701-A kit that shows off TMP Star Fleet color scheme very nicely:
http://www.ketzer.com/enterprise/index.html
And I also found the original movie model on these pages that really shows off the colors as well:
http://www.cloudster.com/Sets&Vehicles/STMPEnterprise/ColorPhotos/STMPEnterpriseColor.htm
Hope these help you. However, I'm betting that X-ships in the SFU look very similar to TOS ships or what Adam has created (since it has been used on the X1R: X-Ship Reinforcements supplement, which would make it "canon" for ADB, correct?)
Rick
EDIT: Wow. I just saw that the original post was from 2007. My bad. I'm sure your project has long been finished. ![Wink](images/smiles/icon_wink.gif) _________________
UPFY |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Wolverin61 Commander
![](images/avatars/3029580904a28619becfa8.jpg)
Joined: 16 Nov 2008 Posts: 495 Location: Mississippi
|
Posted: Sun Jan 04, 2009 1:19 am Post subject: |
|
|
Thanks for those links, some great pics there that really show off the 'Aztec' pattern on the saucer.
Don't feel bad, I didn't notice the date when I made my post either. ![Surprised](images/smiles/icon_surprised.gif) _________________ "His pattern indicates two-dimensional thinking."
![](http://i349.photobucket.com/albums/q369/wolverin61/SFB-Ribbons.jpg) |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
OGOPTIMUS Captain
![](images/avatars/725069854f0279524c97e.png)
Joined: 10 Nov 2006 Posts: 980
|
Posted: Sun Jan 04, 2009 10:20 pm Post subject: |
|
|
Yes, it's been done for quite some time now.
Here's what I came up with:
My Federation Advanced Cruiser.
previously
Since then, I’ve modified it (after putting it in simple green loosened the putty and had to be redone) by removing two of the saucer torpedoes, the rear phasers, adding cooling units to the engines and adding the buildup between the nacelles. I’m really getting to like how this one turned out. I wasn’t always enamored with it, but it’s really grown on me lately.
The USS Revolution.
no decals set 1
no decals set 2
decals set 1
decals set 2
It's white rather than my standard gull grey for Fed ships. _________________ O.G. OPTIMUS
Newest Page | Newer Page | OLD Page |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Rick Smith Lieutenant Commander
![](images/avatars/534987054c56eedf84abd.png)
Joined: 02 Sep 2008 Posts: 266 Location: Silver Spring, MD
|
Posted: Sun Jan 04, 2009 10:54 pm Post subject: |
|
|
Looks good to me! Nice work. _________________
UPFY |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
Scoutdad Commodore
![](images/avatars/gallery/fed_command/BGM.jpg)
Joined: 09 Oct 2006 Posts: 4754 Location: Middle Tennessee
|
Posted: Sun Jan 04, 2009 11:12 pm Post subject: |
|
|
I like the changes Paul.
Keep up the good work. _________________ Commander, Battlegroup Murfreesboro
Department Head, ACTASF |
|
Back to top |
|
![](templates/subSilver/images/spacer.gif) |
|